ResetMaster

• hostname (17 bytes)
• mac address (6 bytes)
• listen port (1 byte)
• confreg (1 byte)
• ip (4 bytes)
• subnet (4 bytes)
• gateway (4 bytes)
• password (25 bytes)
• channel_type (1 byte)
• channel_stat (1 byte)
• label_1 (17 bytes)
• label_2 (17 bytes)
• label_3 (17 bytes)
• label_4 (17 bytes)
• label_5 (17 bytes)

[ x x x x  x x x x ]
           | | | \-  Use DHCP
           | | \---  Require passsword
           | \-----  Use CRAM-MD5 instead of cleartext password auth
           \-------  Bufferized channels (avoid toggle during reset)

Types:

• 0: Disabled
• 1: Bistable
• 2: Normally open
• 3: Normally closed

Registry content:

[ na na na na na na 5h 5l ] [ 4h 4l 3h 3l 2h 2l 1h 1l ]

This register is used to save the status of bistable channels. The value isn't taken in consideration for normally open or normally closed channels.

* show channels
* show running-config
* show startup-config
* toggle channel <#>
* configure
* reload
* write

Displays channels status

Output:

Channel 1 [XXXXXXXXXXXXXXXX] (toggle): high
Channel 2 [XXXXXXXXXXXXXXXX] (toggle): low
Channel 3 [XXXXXXXXXXXXXXXX] (toggle): high
Channel 4 [XXXXXXXXXXXXXXXX] (Normally open)
Channel 5 [XXXXXXXXXXXXXXXX] (Normally closed)
Channel 6 [XXXXXXXXXXXXXXXX] (Normally closed)
Channel 7 [XXXXXXXXXXXXXXXX] (Normally closed)
Channel 8 [XXXXXXXXXXXXXXXX] (Normally closed)

Displays the running configuration.

Displays the startup configuration.

Toggles the channel state.

If the channel is bi-stable, the channel will be kept in the current state until the channel is toggled again. Otherwise, the channel will be toggled into the active state (closed for a normally opened, opened for a normally closed) for 1 second.

Enter into configuration mode

Performs a self reset. User will be asked to confirm this action.

Writes the running configuration into the startup configuration.

!
network
  dhcp no
  ip 192.168.1.15
  netmask 255.255.255.0
  gateway 192.168.1.1
  port 23
!
system
  auth cleartext-pass
  hostname psw0-f5zbr
  password thisisapassword
  output_buffer no
!
channel 1
  name CHANNEL 1
  type toggle
  state high
!
channel 2 {
  name CHANNEL 2
  type toggle
  state low
!
channel 3 {
  name CHANNEL 3
  type toggle
  state high
!
channel 4 {
  name CHANNEL 4
  type no
!
channel 5 {
  name CHANNEL 5
  type nc
!